Quantcast

Customer Service -

Mounting Your Panel Antenna

Print Friendly and PDF Print

When you get your panel antenna you may think that it’s a little odd that there are not any pre-drilled holes for mounting. Please do not drill your own! If you turn the antenna over you will see that there is a piece of plastic that covers the mounting area. If you take a flat-head screwdriver -while this is unplugged from the booster- you can pry up that piece of plastic. You will then see the hole for the mounting bracket. If you have any questions about this, or believe that you have received the wrong antenna, please call us at 1-866-294-1660, or email us at support@wilsonelectronics.com.

 

Was this article helpful?
0 out of 0 found this helpful

Have more questions? Submit a request

Have more questions? Submit a request

Comments